• Standardized Methods = Consistant Results

    When dispensing draft beer from a pressurized keg into an ordinary cup, it has a tendency to create CO2 breakout (foaming). Even though it occurs incrementally, excessive foaming is a very expensive waste issue to owners and operations serving draft beer.

     

    As much as 45% of a beer keg can be wasted by excess foaming.

     

    Most draft beer waste is a result of bad pouring techniques. These endless variations in techniques result in excess foaming which is discarded by staff with each and every pour who then attempt to fill the cup again with more draft beer. No matter how much time is spent training staff members, without a standardized pouring method there will always be variations in pouring techniques, including the managers who train staff.

     

    None of these techniques can be considered correct. In environments where there are many staff members, the draft beer foam waste is multiplied many times. The ultimate desire is to minimize waste (excess foaming), as well as the time required to serve each customer.

     

    The patented and revolutionary JRC Precision Technologies® Low Foam EZ Pour Cup design is specifically engineered to create one standardized pouring method, significantly reducing draft beer foam waste. The "Standardized Point-of Reference Pouring Method" along with the cup’s curved bottom and sidewall minimizes excess foaming. Our designs reduce labor & training costs and improve customer service while increasing profits. Additional revenue streams can also be added from our cup Companion Accessories.

  • broken image

    ANATOMY of the LOW FOAM EZ POUR CUP

    1. The upper end of the fluted cone device is tapered to split the stream of beer into a 360-degree curtain of liquid, minimizing CO2 breakout (foaming).

    2. The smooth fluted cone is the point of reference for pouring, standardizing the pouring to only one method. We call this "Standardized Point-of-Reference Pouring".

    3. The fluted cone increases surface area while causing the liquid to slow down without disruption as it travels to the bottom of the cup.

    4. The smooth, concave tapered bottom increases the surface area of the cup as it fans out to the outer wall. The mild slope to the outer wall of the cup minimizes CO2 breakout, therefore less foaming.

    5. The eased curved corner where the sidewall of the cup meets the bottom causes the liquid to roll as it reaches the outer wall, minimizing CO2 breakout.

    6. The flutes of the cone act as a light prism, causing the disposable LED light fixture, when snapped into place, to reflect off the flutes with more intensity.

    7. Small depressions located near the bottom of the cup in the hollow area of the fluted cone allow the companion accessories to easily snap into place.
       

  • broken image

    Dock It! Pour It!
    It's That EZ!

     
    Attach the reusable FDA polycarbonate plastic Feeder Dock Nozzle that fits your existing draft beer faucet, held in place by an FDA approved rubber gasket. One disposable Feeder Dock Nozzle is packed with every case of recyclable PET plastic cups.
     
    DOCK IT! Now you’re ready to pour your first draft beer. 
    The Feeder Dock Nozzle self-centers the Low Foam EZ Pour Cup on the Feeder Dock.
     
    POUR IT! A 360-degree curtain of draft beer will flow down the fluted cone to the bottom of the cup. It's as simple as 1, Dock It! 2, Pour It! No three required.
     
    In the current draft beer pouring industry, there have been a number of inventions to help pour a better beer. Most of these machines, systems, and nozzles are expensive, need constant maintenance, not to mention costly repairs. Some of these systems pour the draft beer while the operator stands back pressing buttons. Some systems have expensive cups that leak from the bottom.
     
    The Low Foam EZ Pour Cup still offers the customer the visual experience of watching their draft beer being poured
    by a knowledgeable staff member. No machine breakdowns, or expensive cups that leak. No constant cleaning.

  • The Low Foam EZ Pour Cup Pours A

    Perfect Draft Beer Every Time!

    Watch! Finally, a disposable cup that standardizes the method to pour a perfect draft beer every time with no waste!

  • IT'S THE DOLLARS THAT MAKE SENSE

    This table shows the Increased Retail Dollars gained by using JRC Precision Technologies Low Foam EZ Pour Cup.  
    The “Standardized Point-of-Reference Pouring Method”, Dock It! Pour It!, significantly reduces excess foaming by standardizing the pouring method.
    broken image

    LESS FOAM. MORE BEER. MORE DOLLARS.

  • broken image

    The Keep Cool Can


    The Keep Cool Aluminum Can is much more than your common aluminum can. It's ability to cool the contained beverage faster in a refrigerator or ice chest is due to the increased surface area, made possible by the can's revolutionary design. Before this product, cans could only cool from the outer wall surface. With this inner hollow core, cold air and ice penetrate more exposed surface area, allowing for faster cooling. The organic Phase Changing Material (PCM) pod, called the Keep Cool Pod, snaps into place on the underside of the can, keeping cooled beverages chilled longer, thus making all other aluminum cans obsolete.

     

    The patented fluted cone increases cooling surface area of the can while making the can stronger and more rigid.

     

    Licensed Keep Cool Aluminum Can manufacturers can increase market share across all aluminum canned beverages, while consumers can enjoy a cold beverage, longer. Beverage companies of all types can now offer our revolutionary design that will cool beverages faster, maintain beverages at a cooler temperature longer, offering optimal product flavor to the last sip.

     

    Our revolutionary can design can offer additional sales by selling the reusable Keep Cool Pod accessory, which is filled with the PCM mentioned above. The Keep Cool Aluminum Can is available in varied cone sizes. Our tall cone will maintain beverages at a lower temperature, longer. The medium and short cone sizes are still effective, but with slightly less cooling capability.

    broken image

    Licensing is available from JRC Precision Technologies® to manufacture cans with our fluted cone technology. US Patent 11,116,340.

  • broken image

    Companion Accessories That Create Additional Revenue Streams Resulting In Increased Profits

    The biggest benefit of the Low Foam EZ Pour Cup is the fluted cone's hollow core. The capacity-to-size relationship has been maintained by making minor adjustments to the dimensions of each cup size. The fluted cone displaces minimal capacity but increases the surface area of the cone, while making the cup stronger and more rigid. The hollow core offers space for our illumination and cooling accessories that easily snap into place.

  • Licensing Opportunities

    The JRC Precision Technologies® suite of revolutionary designs are incredibly versatile and available for licensing to a number of industries, including retail beverage packaging, and disposable & durable beverage containers. The fluted cone design is rigid, which makes it ideal for carbonated beverages that exude pressure on their packaging. JRC products are patent protected, ensuring that authorized licensees in the market will be protected by 12 patent claims as well.

    PET Disposable Plastic Cup Manufacturers

    Disposable PET cup and plastic pitcher manufacturers can see additional sales by selling the Illumination Device and the reusable Keep Cool Pod accessories. Both are available in a number of different sizes and can be purchased for use once a licensing agreement is in place for our patented fluted cone container. US Patent 11,116,340.

    Aluminum and Plastic Beverage Packaging Manufacturers

    Consumers will enjoy a huge benefit of the Keep Cool Aluminum Can, Keep Cool Pod, and Keep Cool Bottle. Beverage companies can now offer a very marketable aluminum can that will maintain cooler beverage temperatures and optimal product taste to the last sip. Aluminum beverage can and plastic bottle manufacturers can see additional sales by selling the reusable Keep Cool Pod accessory, which will be available in a number of different sizes and can be purchased from JRC Precision Technologies®. Licensing is also available to manufacture and sell these pods. US Patent 11,116,340.

    Glassware and Acrylic Manufacturers

    Glass and acrylic beverage manufacturers can see additional sales by selling the Illumination Device and the reusable Keep Cool Pod accessories. Both are available in a number of different sizes and can be purchased for use once a licensing agreement is in place for our patented fluted cone container. US Patent 11,116,340.

    Cookie Use
    We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
    Learn More